Pt100, -200 °C to +300 °C, 2.3 x 2.0 mm, class F0.3, 10 mm inversed wires, metallized backside
Thin-film platinum 100 Ohm RTD component with inversed wires and metallized backside for excellent thermal coupling - ideal for mounting to the bottom of a tube or a blind hole and for applications with limited space.
Product details
Excellent thermal coupling and fast response time
Metallized backside (M)
To increase accuracy and response time, IST AG offers a standard RTD sensor with a metallized backside allowing the sensor to be soldered onto a metallic surface and thereby increasing the thermal coupling.
IST AG not only offers sensors with metallized backsides for soldering but also constructions like soldered sensors to tubes, in caps, on metal discs and onto various metals.
RealProbeTemp (RPT)
The RealProbeTemp is a pre-assembled stainless steel probe for the simplified manufacturing of temperature probes. The RPT provides an outstanding response time. The construction of the RealProbeTemp allows a minimized immersion depth (e.g. liquids at a depth of 10 mm or in some cases slightly less). Therefore it is an optimal solution in applications with limited space and pipe diameter.
Especially for applications where reduced space and large temperature gradients between surroundings and the measurement medium poses a challenge, the RealProbeTemp is the ideal solution for an accurate measurement.
The RealProbeTemp can act as a standalone probe assembly or as a sub-assembly inserted to minimize the fabrication process and materials of larger or more complex probe assemblies. This results in reduced manufacturing costs and enhanced performance of the finished assembly.
Platinum Sensors
Innovative Sensor Technology IST AG platinum temperature sensors provide solutions for extreme temperature applications and are designed with the highest quality materials, allowing them to operate within a wide temperature range of -200 °C to +1000 °C. Standard IEC 60751 sensors are offered in class F0.3 (0.12 %), class F0.15 (0.06 %), F0.1 (0.04 %), and higher accuracies upon request.Our sensors are available in wireless (SMD) and wired configurations, and in sizes ranging from 0.75 mm to 10 mm (L), and 0.75 mm to 5.08 mm (W). Standard sensors can be customized with a variety of lead wire material, insulations, length, and configurations.
With many years of experience, IST AG also offers development of customer-specific applications in terms of sensor technology development and consultation. As part of the standard development process, IST AG offers support at the point of implementation - this way we ensure the best sensor solution for specific applications.
Inverted welded and bend leads (U) or axial lead wires
For applications with limited space, IST AG offers solutions with inverted welded and bent leads or axial lead wires.
Inverted and bent leads are the optimal solution for applications in tubes where sensors are soldered to the bottom of the tube. They are additionally used in applications with limited space where an optimal thermal contact is required and obtained by soldering sensors to surfaces. That’s why the temperature sensors are also offered with a metallized backside to increase thermal coupling and with long directly welded wires to increase assembly processes and robustness.
Axial lead wires allow an extreme narrow sensor chip construction for applications where the sensor for example has to fit in a bore with an inner diameter of less than 0.6 mm.
Quality
Consistent with the well-known, high-quality standards in Switzerland, IST AG is certified according to ISO 9001:2015 (quality) and ISO 14001:2015 (environment). Appropriate processes are part of our daily work. They are regularly audited and extended parallel to the growth of our company.