Production process - from the idea to the finished sensor

.

Innovative Sensor Technology IST AG
Sensor production process

This is how your sensors are made

Learn more about Innovative Sensor Technology IST AG, about how we work, the technologies we use and our production processes.

The IST AG design process is where it all begins. First a meeting takes place between our engineers and the customer to discuss the specific application requirements. Depending on the complexity of the project the solution can either be an existing sensor or a custom made design. For custom designs, prototypes are developed and thoroughly tested.

IST Sensor Design

Design

Our consultants and engineers discuss your application's requirements with you to better understand your needs. Perhaps one of our thousands of standard products will suffice, or we make a minor adjustment or create a completely new product.

Deposition of substrates

Deposition of substrates

The first production step is deposition, where sputtering is used in order to cover the substrates with a thin layer over the entire surface. Depending on the type of sensor that is required, different materials, thicknesses and qualities can be chosen for the covering.

Photolithography

Photolithography

In this step, the substrates are coated with photosensitive lacquer by a centrifuge. All our sensor structures are sketched on so-called masks: through exposure, light is lead through the mask onto the photoresist. The covered parts are not reached by the light, leaving the coating unexposed. During the subsequent developing of the substrates, the coating on the exposed areas is washed away, the non-exposed area remains on the substrate.

Etching

Etching

During the etching process the part of the coating that is not required is removed through etching. Two different processes are used to etch the substrates: ion etching and wet-chemical etching.

lasertrimming

Laser trimming

IST AG uses laser trimming or laser calibration as a method of adjusting (trimming) components by laser induced material changes. Thereby the resistance value is increased continuously by decreasing the meander structure until the desired value is achieved.

production process screen printing

Screen printing

During screen printing, the contact points are strengthened with a conductive paste. This enables a better connection between the contact point and the electrical contacts. Additionally, the substrate is covered with a non-conductive paste, which prevents scratches and damages of the sensor due to mechanical or chemical influences.

production process dicing

Dicing

While dicing, the substrates are cut into individual strips, so that afterwards wires can be welded on the sensors.

production process welding

Welding

For the welding process, IST AG offers various possibilities of wire material, lengths and diameters that are welded to the chip. We distinguish between bare and insulated wires. To enhance the welding point and to protect it from mechanical damage, a paste is applied to the welding area offering an outstanding pull-strength.

production process measuring

Measuring

During the final electrical measurement, all sensors are checked. Depending on their classification or assembly they are qualified either with a 2-point calibration measurement or resistance-testing. According to their accuracy they are sorted into different classes.

Our versatile technological portfolio covers different substrate material choices, the use of thin- and thick-film technologies and patterning technologies as well as diverse test and assembly options.