Driver circuit board for a quick evalution of HISsmd series IR emitters
155822
from CHF 66.08
Sensor Finder
View Results
Flow range from 0 to 100 m/s, -20 °C to +150 °C
Chip size/dimensions
ø6 x 14 mm housing 4 x 2.4 (chips outside housing)
Connection type
Cu/Ag-stranded wires AWG 30/7, PTFE insulated, 2x red for heater, 2x black for temperature
155846
from CHF 25.24
FC (FlipChip) Platinum 100 Ohm RTD component, -50 °C to +250 °C, FC 0603, taped only (without reel), sensor side down
Chip size/dimensions
1.5 x 0.75 x 0.4 mm
Tolerance/class
IEC 60751 F0.15 (IST AG reference class A)
155609
from CHF 1.96
FC (FlipChip) Platinum 100 Ohm RTD component, -50 °C to +250 °C, FC 0805, taped only (without reel), sensor side down
Chip size/dimensions
2.0 x 1.25 x 0.50 mm
Tolerance/class
IEC 60751 F0.15 (IST AG reference class A)
155650
from CHF 1.96
FC (FlipChip) Platinum 1000 Ohm RTD component, -50 °C to +250 °C, FC 0603, taped only (without reel), sensor side down
Chip size/dimensions
1.5 x 0.75 x 0.4 mm
Tolerance/class
IEC 60751 F0.15 (IST AG reference class A)
155603
from CHF 1.96
FC (FlipChip) Platinum 1000 Ohm RTD component, -50 °C to +250 °C, FC 0805, taped only (without reel), sensor side down
Chip size/dimensions
1.9 x 1.15 x 0.4 mm
Tolerance/class
IEC 60751 F0.15 (IST AG reference class A)
155648
from CHF 1.96
FC (FlipChip) Platinum 1000 Ohm RTD component, -50 °C to +150 °C, FC 0805, taped only (without reel), sensor side down
Chip size/dimensions
1.9 x 1.15 x 0.4 mm
Tolerance/class
IEC 60751 F0.15 (IST AG reference class A)
155655
from CHF 1.96
FC (FlipChip) Platinum 100 Ohm RTD component, -50 °C to +150 °C, FC 0805, taped only (without reel), sensor side down
Chip size/dimensions
1.9 x 1.15 x 0.4 mm
Tolerance/class
IEC 60751 F0.15 (IST AG reference class A)
155656
from CHF 1.96
Gas flow sensor with flow range from 0 to 100 m/s and temperature range from -20 °C to +400 °C
Chip size/dimensions
6.9 x 2.4 x 0.20/0.60 mm
Connection type
Pt/Ni wires
104999
from CHF 20.09
Anemometric flow switch for air / gas. The compact air velocity switch with switched ground output for direct control or alarm purposes is designed for use in air and non-corrosive, non-flammable gas atmosphere
Housing dimensions
30 x 76 x 10 mm
Connection type
S4B-ZR-SM4A-TF / JST
156027
from CHF 99.91
Flow Demo Board with FS7 Sensor: evaluation electronics for anemometric (thermal) flow sensors
Connection type
PCB connector
Housing
45 x 25 mm
104018
from CHF 128.75
Hermetic gas filter cell with soldered CaF2 windows
155798
from CHF 235.20
Hermetic gas filter cell with glued CaF2 windows
155802
from CHF 195.44
Hermetic gas filter cell with soldered CaF2 windows
155781
from CHF 175.84
Hermetic gas filter cell with glued CaF2 windows
155800
from CHF 131.04
Hermetic gas filter cell with soldered CaF2 windows
155797
from CHF 190.40
Hermetic gas filter cell with glued CaF2 windows
155801
from CHF 150.64
Digital RH/T module, in a 16 bar pressure tight TO housing
Accuracy humidity
±0.5 %RH (0...5 %RH), ±1.0 %RH (5…10 %RH)
Accuracy temperature
±0.2 °C
153398
from CHF 61.80
RH/T module factory-calibrated for high altitute / low temperature measurement
Accuracy humidity
±2 % RH at 23 °C (0 % RH to 90 % RH)
Accuracy temperature
±0.2 K (0 °C to +50 °C); ±0.5 K (-80 °C to 0 °C)
153690
from CHF 82.40
Digital RH/T module, for up to 125°C and 100% RH, withstands condensation
Accuracy humidity
± 1.8 % RH at + 23 °C
Accuracy temperature
±0.2 °C
153349
from CHF 27.81