Force range: 18 N - Application of force: None (hole only) - Contacting: Stranded wires (20cm) with PicoBlade connector - Housing: None
Sensor Finder
Select a Category
Select a Subcategory
Select subcategory
-
Force
Centered force sensors made by SENSTECH can be inserted into a blind hole with a diameter of 12 mm. The force application point is right in the middle. For force ranges from 18 N to 300 N.
-
Signal Amplifiers
SENSTECH Instrumentation amplifiers used for signal amplification to the full operating voltage range, when the unamplified signal voltage of a thin-film sensor of a few millivolts per volt of supply is insufficient.
-
Surface Strain
Upon request: Surface strain sensors of SENSTECH for the indirect measurement of large forces on loaded plant parts. The sensors are welded into a holder which fits on the part to be monitored and is rigidly attached to it.
-
Torque
Upon request: SENSTECH Sensor elements for shear stress measurements and sensor solutions for larger loads or with particularly compact dimensions
-
Pressure
Upon request: Specialized in the development and production of OEM sensors for pressure measurement and monitoring, SENSTECH has co-developed sensors for various medical technology applications.
View Results
Force range: 200 N - Application of force: None (hole only) - Contacting: Stranded wires (20cm) with PicoBlade connector - Housing: None
Force range: 200 N - Application of force: Rivet on top side - Contacting: Tinned solder pads only - Housing: None
Force range: 200 N - Application of force: Rivet on top side - Contacting: Stranded wires (20cm) with PicoBlade connector - Housing: None
Force range: 200 N - Application of force: Rivet on top side - Contacting: Straight flex ribbon «Spirit» - Housing: None
Force range: 200 N - Application of force: Rivet on bottom side - Contacting: Stranded wires (20cm) with PicoBlade connector - Housing: None
Force range: 200 N - Application of force: Rivet on bottom side - Contacting: Stranded wires (20cm) with PicoBlade connector - Housing: Screw-on metal housing
Force range: 300 N - Application of force: None (hole only) - Contacting: Stranded wires (20cm) with PicoBlade connector - Housing: None
Force range: 300 N - Application of force: Rivet on top side - Contacting: Tinned solder pads only - Housing: None
Force range: 300 N - Application of force: Rivet on top side - Contacting: Stranded wires (20cm) with PicoBlade connector - Housing: None
Force range: 300 N - Application of force: Rivet on top side - Contacting: Straight flex ribbon «Spirit» - Housing: None
Force range: 300 N - Application of force: Rivet on bottom side - Contacting: Stranded wires (20cm) with PicoBlade connector - Housing: None
Force range: 300 N - Application of force: Rivet on bottom side - Contacting: Stranded wires (20cm) with PicoBlade connector - Housing: Screw-on metal housing
Force range: 50 N - Application of force: None (hole only) - Contacting: Stranded wires (20cm) with PicoBlade connector - Housing: None
Force range: 50 N - Application of force: Rivet on top side - Contacting: Tinned solder pads only - Housing: None
Force range: 50 N - Application of force: Rivet on top side - Contacting: Stranded wires (20cm) with PicoBlade connector - Housing: None
Force range: 50 N - Application of force: Rivet on top side - Contacting: Straight flex ribbon «Spirit» - Housing: None
Force range: 50 N - Application of force: Rivet on bottom side - Contacting: Stranded wires (20cm) with PicoBlade connector - Housing: None
Force range: 50 N - Application of force: Rivet on bottom side - Contacting: Stranded wires (20cm) with PicoBlade connector - Housing: Screw-on metal housing
Force range: 80 N - Application of force: None (hole only) - Contacting: Stranded wires (20cm) with PicoBlade connector - Housing: None