Kraftsensor zentriert KZ-011-0400-18N-E0-K1-G0

Kraftbereich: 18 N - Krafteinleitung: Ohne (nur Loch) - Kontaktierung: Einzellitzen (20cm) mit PicoBlade Stecker - Gehäuse: Ohne Gehäuse

Bei diesem kompakten Kraftsensor wird die Kraft auf einen Rundkopfniet in der Mitte eingeleitet. Der Sensor kann sehr einfach in einem Sackloch mit einem Durchmesser von 12 mm (0,472 in) und einem Spiel montiert werden. Durch die flexiblen Kontaktierungs- und Gehäuseoptionen eignet sich dieser Sensor für vielfältige Anwendungen.

Product Name
KZ-011-0400-18N-E0-K1-G0
Kraftbereich
18 N
Krafteinleitung
None (hole only)
Elektrische Kontaktierung
Stranded wires (20cm) with PicoBlade connector
Gehäuse
None
Überlastbereich
27 N
Empfindlichkeit
158 µV/V/N
Betriebsspannung
0...15 V DC
Stromaufnahme
1.5 …. 2.5 mA at 10 V supply voltage
Ausgangssignalbereich
0 .... 3.0 mV/V
Brückenwiderstand
4.0 …. 6.0 kΩ
Nullpunkt
-0.1 .... 0.1 mV/V
Reproduzierbarkeit Nullpunkt
±0.02 %FS
Toleranz der Empfindlichkeit
±10 %
Reproduzierbarkeit der Empfindlichkeit
±0.3 %
Linearitätsfehler
±0.2 %FS
Temperaturfehler Nullpunkt
±0.02 %FS/°C
Temperaturfehler Empfindlichkeit
0.02 …. 0.03 %/°C
Substratmaterial
Stainless Steel 1.4542 / X5CrNiCuNb16-4 /17-4 PH®
E-Modul
197·10³ MPa (28.5·10⁻⁶ ksi)
Substrate thickness
0.5 mm
Masse (LxWxH)
10.5 x 9.0 x 1.1 mm
Betriebstemperatur
-20 …. 125 °C
Umbebungsfeuchte
0 …. 95 %RH non-condensing
Schutz vor Eindringen
IP44
Verpackung
Plastic bag and label with individual calibration data
155882

Product details

Centered Force Sensors KZ-011-400

The centered force sensor KZ-011-0400 can be inserted into a blind hole with a diameter of 12 mm. The force application point is right in the middle. Due to the many available force ranges between 18 and 300 N, the possibility of applying force on both sides and the three contact variants, the sensor is suitable for a wide range of applications. It can be used, for example, in medical devices, measuring and testing devices or industrial plants. Versions with a laser-welded metal housing are also available for particularly easy installation and mechanical protection.

> View data sheet KZ-011-0400

> Download brochure

Outstanding sensor properties thanks to thin-film technology

Senstech force sensors are manufactured using thin-film technology. This makes them particularly reliable and long-term stable because the measuring element is applied directly to the metal using sputtering technology. Unlike bonded strain gauges, there are no adhesives and no creeping layers which reflects in the typical technical properties:

  • Best long-term stability with drift < 0.03%/year
  • High temperature stability even without temperature compensation (typically < 0.01%/°C)
  • Very good linearity with correctly designed measuring bodies
  • Excellent miniaturization possibilities
  • Simple signal processing

 

Senstech is a pioneer in thin-film based sensor technology. The broad knowledge and experience flows into all of their products.

The perfect fit for your application

Thanks to Senstech's flexible manufacturing processes, it quickly pays off to adapt a sensor to your individual requirements. All essential parameters can be customized:

  • Geometry and material of the sensor
  • Layout of the thin film elements
  • Mechanical and electrical interfaces
  • Signal processing

The first prototypes can usually be delivered within a few weeks. Didn't find the right sensor in the webshop? Contact Senstech for an individual offer

Contact your specialist for force sensors (senstech.ch)