Contact Form Create your own sensor and fill in your specific requirements or just fill in the contact form if you wish to be contacted by us. Customize your sensor – enter your product specification below. Select Sensor Type TemperatureFlowHumidityConductivityBio Specified Sensor Temperature PlatinumTemperature NickelTemperature TSIC Specified Sensor GasLiquid Specified Sensor SensorsModules TCR 3850 ppm/K (typical) 3911 ppm/K (GOST 8.625-2006) 3750 ppm/K 3770 ppm/K Custom Please advise TCR IEC 6180 ppm/K (typical) 5000 ppm/K (Nickel Landis+Gyr) 5696 ppm/K 6370 ppm/K (Nickel Johnson) 6720 ppm/K (ANSI) Balco 4280 ppm/K (Copper, GOST 6651-2009) Custom Please advise Custom Resistance (in Ω at 0 °C) 50 Ω 100 Ω (typical) 200 Ω 500 Ω 1000 Ω (typical) Custom Please advise Custom Size (in mm) Length Length: mm Width Width: mm Height Height: mm Not critical Not critical Operating temperature range (in °C) From From °C To To °C Connections Enameled Cu-wire (max. +150 °C) PTFE-insulated Cu/Ag-wire, AWG 30 (max. +200 °C) PTFE-insulated Cu/Ag-stranded wire, AWG 27/8 (max. +200 °C) PTFE-insulated Ag-wire, AWG 30 (max. +250 °C) Au-coated Ni-wire (max. +300 °C) Au-coated Ni-flat wire (max. +300 °C) Ag-wire (max. +400 °C) Pt-cladded Ni-wire (max. +600 °C) Pt-wire (max. +750 °C) SMD (no wires, wrap-around contacts, max. +250 °C) FlipChip (no wires, contacts on one side, max. +600 °C) Custom Please advise Connections Enameled Cu-wire (max. +150 °C) PTFE-insulated Cu/Ag-single wire, AWG 30 (max. +200 °C) PTFE-insulated Cu/Ag-single wire, AWG 26 (max. +200 °C) CuP-SIL wire post-plated with Sn (max. +200 °C) Au-coated Ni-flat wire (max. +300 °C) Ni-wire (max. +300 °C) Ag-wire (max. +300 °C) SMD (no wires, wrap-around contacts, max. +150 °C) Custom Please advise Custom Tolerance class IEC 60751 F0.15 (class A) IEC 60751 F0.3 (class B) IEC 60751 F0.6 (class C) IEC 60751 F0.1 (class Y) 1/5 IEC 60751 1/10 IEC 60751 Pair Group Custom Please advise Tolerance class IEC 43760 1/2 IEC 43760 Custom Please advise Custom Custom Wire length (in mm) mm Special Inverted wires Metallized backside Insulated and extended wires Perpendicular wires Round ceramic housing Housings and assembly Small dimensions Pairs / Groups Substrate thickness 0.25 mm Substrate thickness 0.38 mm 3-wire extension 4-wire extension Custom layout (please upload drawing) Special substrate material Other Special substrate material Other Special Substrate thickness 0.25 mm Sintered powder Metallized backside Inverted wires Customer-specific Inverted welding Other Other Customer-specific Your specific requirements Fast response time Low thermal mass Low self-heating High sensitivity Stainless steel surface temperature measurement Most inexpensive option Other Other Accuracy ±0.5 °C at +80 °C range ±0.3 °C at +80 °C range ±0.1 °C at +40 °C range (limited measuring range from -10 °C to +60 °C) ±0.07 °C at +20 °C range (limited measuring range from -10 °C to +60 °C) Customer specific calibration Bit size 11 bit 14 bit Output signal analog 0 V to 1 V ratiometric 10 % to 90 % V+ Digital ZACWire Protocol Housing SOP-8 TO92 Customer specific housing Special Special calibration Special assembly Special Flow range (in m/s) From From m/s To To m/s Flow range From From m/s To To m/s Temperature range (in °C) From From °C To To °C Response time (in ms) ms Accuracy (in %) % Electronics Yes No Conductivity range (in mS/cm) From From mS/cm To To mS/cm Temperature range (in °C) From From °C To To °C Connection Pt/Ni wires, Ø 0.2 mm Cu/Ag wires, PTFE insulated, AWG 30 FC (no wires) Other Other Tolerance IEC 60751 F0.3 IEC 60751 F0.6 Other Other Wire length (in mm) mm Pressure range (in bar) From From bar To To bar Type P14 MK33 K5 Type HYT 271 HYT 221 HYT 939 LinPicco DigiPicco Humidity range (in %RH) From From %RH To To %RH Medium in which the sensor is measuring Temperature range (in °C) From From °C To To °C Connection CuP-SIL-wire post-plated with Sn Au/Cu-wire, Ø 0.4 mm SMD Accuracy +/- %RH Capacitance (in pF) From From pF To To pF Wire length (in mm) mm Pressure range (in bar) From From bar To To bar Measurement method Dip-in probe Flow-through sensor Other Other Target analytes Glucose Lactate Glutamine Glutamate Other Detection limit (in g/L) Glucose Glucose (g/L) Lactate Lactate (g/L) Glutamine Glutamine (g/L) Glutamate Glutamate (g/L) Other Other (g/L) Maximum concentration (in g/L) Glucose Glucose (g/L) Lactate Lactate (g/L) Glutamine Glutamine (g/L) Glutamate Glutamate (g/L) Other Other (g/L) Sterilization Gamma Beta Measurement medium Minimum operational lifetime (in days) days File upload Browse Files must be less than 10 MB.Allowed file types: gif jpg jpeg png tif txt rtf pdf doc docx odt ppt pptx xls xlsx ods xml gz rar zip. Salutation * Salutation*Mrs.Mr. First name Name * Company Country* * ZIP code* * City* * Address Text Email * Phone Skype Please contact me via Email Phone Newsletter Yes, I want to be informed about news from Innovative Sensor Technology IST AG Leave this field blank Enter the characters shown in the image.